> ## Documentation Index
> Fetch the complete documentation index at: https://docs.corbinsworkshop.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Known Parameter List

Parameters that work well for the Autodesk Fusion VBit Inlay Plugin and Vectric VCarve. Parameters vary by bit selection, wood species, wood orientation (face grain vs end grain), and the particular CNC machine. These are proven cut results that have worked for people. If you have something that works, [email me](mailto:corbin@corbinsworkshop.com)!

> [accordion] 15 Degree Engraving 0.005 Tip Width - Amana 45611-K
>
> [Purchase the bit: Amazon](https://amzn.to/4oeJ1Zo)
>
> > [accordion] Feeds and Speeds
> >
> > * Walnut face grain: 12,000 RPM / Feed: 15 IPM / Plunge: 15 IPM
> > * Cherry face grain: 14,000 RPM / Feed: 20 IPM / Plunge: 15 IPM
> > * Hardwood end grain (or less details): 18,000 RPM / Feed: 54 IPM / Plunge: 18 IPM
> > * Stepover: 0.0024 in
>
> > [accordion] Parameters for 0.100\\" depth inlay
> >
> > * `inlay_depth`: 0.100"
> > * `inlay_fit_adjustment`: 0.060" (up to 0.070")
> > * `plug_surface_gap`: 0.050"
> > * `plug_base_thickness`: 0.250
>
> > [accordion] Parameters for 0.240\\" depth inlay
> >
> > * `inlay_depth`: 0.240"
> > * `inlay_fit_adjustment`: 0.090"
> > * `plug_surface_gap`: 0.070"
> > * `plug_base_thickness`: 0.240"
> > * `plug_fuzzy_cleanup`: 0.008"

> [accordion] SpeTool W01005 5.26 Deg Tapered Angle Ball Nose 0.25mm Radius
>
> * [Purchase the bit: Amazon](https://amzn.to/4aNb1zP)
>
> > [accordion] Feeds and Speeds
> >
> > * End Grain: 18,000 RPM / Feed; 25.2 IPM / Plunge: 12 IPM
> > * Stepover: 0.0024 in
>
> > [accordion] Parameters for 0.240\\" depth inlay
> >
> > * `inlay_depth`: 0.240"
> > * `inlay_fit_adjustment`: 0.000" to 0.005"
>
> > [accordion] Bit Tool Setup
> >
> > ![Setup](https://www.corbinsworkshop.com/wp-content/uploads/2026/01/TBN-as-Engrave-Bit-scaled.png)

> [accordion] 30° 2 Flute V-Groove Bit - Bits\&Bits (425-VG30)
>
> * [Bit link](https://bitsbits.com/product/425-vg30/)
>
> * 30 degree v-bit, 0" tip width (you must set a small tip width in the tool setup!)
>
> > [accordion] Feeds and Speeds
> >
> > * Facegrain: 16,000 RPM / Feed: 40 IPM / Plunge: TBD
> > * Feed optimization: 5 degree change, 10 IPM
>
> > [accordion] Parameters for 0.240\\" depth inlay
> >
> > * `inlay_fit_adjustment`: 0.030"

> [!NOTE]
>
> **Need help?** Join Corbin's Facebook group [CNC Woodworking](https://www.facebook.com/groups/corbincncwoodworking) or email [corbin@corbinsworkshop.com](mailto:corbin@corbinsworkshop.com)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.